Menu
Cart

CHRISTY’S WET OR DRY CONDITIONS

$0.00

  • 236ml Can
  • For installation or repair in wet or inclement weather conditions. WET or DRY is specially formulated to get the job done right!
  • A Pro-Grade “Blue Glue” – Premium formulation designed to work in all jobsite conditions
  • Extremely fast set and cure times enable maximum productivity.
  • Can be used without a primer for non-pressure systems up to 6″ and pressure systems below 4″, if local codes permit
  • For PVC pipe and fitting applications; potable water, pressure, non-pressure, conduit, drain, duct, DWV and sewer

In stock

SKU: 20014445 Category:

Description

Directions

For use on PVC plastics. Stir and use as is. DO NOT THIN. Discard if jelled. Use within 3 years of date stamped on can.

  1. Cut pipe square, deburr, bevel and wipe clean. Make trial dry fit—Pipe should fit 1/3-2/3 snugly into fitting (socket). Use adequate applicator at least 1/2 size of pipe diameter – dauber, brush, roller or swab. Apply Christy’s® Primer according to directions on primer can. Uniform Plumbing Code requires the use of a purple primer. Can be used without a primer if local codes permit for non-pressure systems up to 6″ and pressure systems below 4″.
  2. Apply a full even coat of cement to outside of pipe and a medium coat of cement to inside of fitting. Coat pipe a second time. Quickly assemble joint while cement is still fluid on both parts. If dry, pipe and fitting must be recoated. Push and rotate pipe into fitting until pipe bottoms in socket. Hold together until joint sets (approx. 30 seconds)
  3. Remove excess cement. Leave joint undisturbed for at least 10 minutes. Full joint strength should be reached within 24 hours depending upon temperature and humidity. See installation Guide for set and cure time and additional information.
  4. DO NOT TEST WITH AIR. STORE BETWEEN 40ºF (4ºC) and 110 ºF (43ºC)